TL084

Quad JFET-input operational amplifier


1OUT	1 •	14	4OUT
1IN-	2	13	4IN-
1IN+	3	12	4IN+
V_CC+	4	11	V_CC-
2IN+	5	10	3IN+
2IN-	6	9	3IN-
2OUT	7	8	3OUT

Pin	Symbol	Description
1	1OUT	output 1
2	1IN-	inverting input 1
3	1IN+	non-inverting input 1
4	V_CC+	positive supply voltage
5	2IN+	non-inverting input 2
6	2IN-	inverting input 2
7	2OUT	output 2
8	3OUT	output 3
9	3IN-	inverting input 3
10	3IN+	non-inverting input 3
11	V_CC-	negative supply voltage
12	4IN+	non-inverting input 4
13	4IN-	inverting input 4
14	4OUT	output 4

Specifications

(typical values under recommended operating conditions, unless specified)

Parameter	Value	Unit
Maximum supply voltage	±18	V
Offset voltage	3	mV
Unity-gain bandwidth	3	MHz
Slew rate at unity gain	13	V/µs
Rise time	0.2 (TL06x) 0.1 (TL07x) 0.05 (TL08x)	µs
Overshoot factor	10 (TL061x 20 (TL07x) 20 (TL08x)	%
Equivalent input noise voltage at f = 1 kHz	42 (TL06x) 18 (TL07x) 18 (TL08x)	nV/√Hz
Supply current (each amplifier)	0.2 (TL06x) 1.4 (TL07x) 1.4 (TL08x)	mA

Notes

The TL06x series are low-power versions of the TL08x series.
The TL07x series are low-noise versions of the TL08x series.

Note: Data is maintained by an independent source and accuracy is not guaranteed. Check with the manufacturer's datasheet for up-to-date information.