4053
Triple 2-channel analog multiplexer/demultiplexer (triple SPDT analog switch)
PDF datasheet
| | | | |
| Y1B | 1 • | 16 | VCC |
| Y0B | 2 | 15 | ZB |
| Y1C | 3 | 14 | ZA |
| ZC | 4 | 13 | Y1A |
| Y0C | 5 | 12 | Y0A |
| E | 6 | 11 | SA |
| VEE | 7 | 10 | SB |
| GND | 8 | 9 | SC |
| | | | |
| Pin | Symbol | Description |
|---|
| 1 | Y1B | independent input/output |
| 2 | Y0B | independent input/output |
| 3 | Y1C | independent input/output |
| 4 | ZC | common input/output |
| 5 | Y0C | independent input/output |
| 6 | E | enable input (active low) |
| 7 | VEE | switch negative supply voltage |
| 8 | GND | ground |
| 9 | SC | select input |
| 10 | SB | select input |
| 11 | SA | select input |
| 12 | Y0A | independent input/output |
| 13 | Y1A | independent input/output |
| 14 | ZA | common input/output |
| 15 | ZB | common input/output |
| 16 | VCC | supply voltage |
Notes
- Each multiplexer/demultiplexer contains two bidirectional analog switches.
- The analog inputs/outputs can swing between VCC and VEE.
- When E is high, all switches are in a high-impedance off state.
Note: Data is maintained by an independent source and accuracy is not guaranteed. Check with the manufacturer's datasheet for up-to-date information.